When the cable ties are warm, they will become more pliable. The plastic will go back to its original shape when it cools off, so you must apply heat several times. Use a hairdryer set on high heat and warm enough to melt the plastic. You can also use heat to loosen the cable ties. You oughtn’t to terminate the cable connections altogether. To unlock the Thule Roof Rack with cable ties, you will have to cut the cable ties. Make sure you don’t have any soft stuff in the car that could be damaged from the vibrations if you miss with the hammer! Cable Ties If it doesn’t, try hitting it again, and so on.
Then bring in the auto and attempt to carry the crossbar. Just plug it enough to make the base of the car jiggle a little bit. It’s going to ring a bit silly, but here it is: Get a big sledgehammer and hit the end of the crossbar right where it attaches to the car’s base. If you’re confident that your Thule roof rack is securely locked and fastened, you can try a brute force method. It should be enough to get the bolt in the wave to pop loose, and the whole thing opens up. The best way to break the lock open is to insert the hex wrench in the keyhole as though you were going to turn it to open the lock and then apply pressure to the end of the tool with the palm of your hand. The hex wrench will give you the power you need, and you can use it with the key that approaches in the box with the unit. The rubber-coated metal key with the Thule rack will open the lock, but it doesn’t provide the leverage you need to get the job done. Voila! The lock should remove, and your rack will be fully open so you can add your gear! Hex WrenchĪ hex wrench might sound like a strange answer to a question about unlocking a roof rack, but it’s the proper way to deal with the issue at hand.
Then all you have to do is urge the wave up with a flat head screwdriver. It will put pressure on the lock and release it. Attach the paper clip to the hole in the keyhole.
#Thule sidekick unlock how to#
Here’s how to unlock the Thule roof rack with a paper clip: You’ll need a paper clip and a flat head screwdriver.
#Thule sidekick unlock install#
Install a new roof rack into your vehicle by following the above steps in reverse order.Remove the existing roof rack assembly.You can do this by using the Philips head screwdriver. Unlock the roof rack and take it off the roof by removing the screws.First, open the roof-rack box and take out the roof rack assembly.Unlock the Thule roof rack with a Philips head screwdriver. The bolt can also be a few different sizes, so you need other metal bits to fit. Make sure the bolt is loose before removing it. It would help if you used a power drill and bit to remove the bolt holding your Thule roof rack on.
Make sure that your rack won’t be too long or too short.
Different Techniques to Unlock Thule Roof Rack without Key: T-bar:
0 kommentar(er)
